Cable Monitor ZPCM6000

Friday, 15 January 2010 15:50 Last Updated on Thursday, 11 March 2010 09:58

ZPCM6000-B_P2_kleiner

Zenitel

Active pilote tone cable monitor

The Cable Monitor ZPCM6000, developed by Zenitel allows monitoring of both cable breakage and changes in path attenuation in combined antenna networks.

Characteristics

Detection of cable breakage
Detection of changes of path attenuations
Automatic adjustment
Communication via TCP/IP or RS485
Fully webbased configurable

Optional

Interface with Zenitel SCADA system ZTSS6000
Data communication via coax cable

Description
The module ZPCM6000 can be used either as a transmitter or as a receiver unit. The integrated highly sensitive and selective radio modem allows separately monitoring of every distribution channel within a complex antenna network. It provides the exact attenuation by measuring constantly the RSSI values within the distribution channel. This information including information like power voltage, temperature, sense input signals, is available via the webbased interface available via TCP/IP on the receiver unit. When a training cycle is selected the units adjusts itself automatically.

After this training cycle the unit will be ready to generate alarms depending on user definable trigger levels.

The module can be powered by an external powersupply or via the coax cable..

Specifications ZPCM6000

Electrical
Frequency band	433 – 435 MHz
Channels / spacing	68 / 25kHz
TX output power	-10 / 0 / +10 dBm
RX sensitivity	-118dBm (for 12dB SINAD)
Electrical input attenuator	31 dB / step 1 dB
Max input power	+20 dBm
Power supply	12 -15VDC
Power consumption
Impedance	50Ω
External inputs / outputs	2 / 2 (unpolair)
Protocol	TCP/IP

Mechanical
Dimensions ZPCM6000	3HE / 10TE
Operating temperature	-10 to +55°C
RF connector	SMA-female
Diagnostic TCP/IP port	RJ45 (front)
RS485 ports	RJ11
Indicators	LED
DC & IN-OUT connector	MC1,5/12 ST-3,5